Clutch Kit Fits John Deere 70 720 730 Disc Pulley Overhaul Rebuild Repair AA6129

One New Aftermarket Replacement Clutch Kit

Fits John Deere Models: 70, 720, 730

Kit Contains:
(2) AA6129R Clutch Pulleys
(2) C614R Clutch Discs
(1) RE29790 Brake Pad Pulley
(3) A352R Clutch Disc Adjusting Springs
(3) 14H862 Clutch Adjusting Nuts
(3) JDS1626 Clutch Pressure Plate Spring (Fits Belleville) Washers

Tech Info:
The pulley clutch disc are 0.393″ thick. Two are need per tractor.

The floating clutch facing discs are 10″ (OD) x 6 3/4″ (ID) x 0.15″ (thick). Two are needed per tractor.

The belt pulley brake lining is a non-asbestos lining with countersunk brass rivets.

The clutch disc adjusting springs measure 1.915″ long and the wire thickness measures 0.12″. The springs mount to the outer cast iron adjusting disc. Three needed per tractor.

The clutch adjusting nuts are 9/16″ slotted hex nuts, 18 NF, Grade 5 and three are used per tractor.

Washers should be torqued initially to 15 FT pounds and adjusted as needed. The washer mounts between slotted adjusting nut and pressure plate.

Models This Part Fits:

720, 730Additional Information: (2) Facing Clutch Pulley10″ disc outside diameter0.393″ thickReplaces Part Numbers: AA5082R, AA6129(2) Facing Clutch Disc10″ outside diameter (OD)6-3/4″ inside diameter (ID)0.150″ thickThe side with the grooves faces the driving disc1-5/8″ lining widthReplaces Part Numbers: R90215, C614R(1) Brake Pad PulleyNon-asbestos lining with countersunk brass rivetsReplaces Part Numbers: AB4748R, AF4748R, RE29790(3) Clutch Disc Adjusting Spring1.915″ long0.740″ outside diameter0.500″ inside diameter0.120″ wire thicknessThe clutch disc adjusting spring mounts to the outer cast iron adjusting disc3 springs used per tractorReplaces Part Numbers: A352R(3) Clutch Adjusting Nut9/16″ – 18 NFGrade 5Slotted hex nut, 9/16″3 used per tractorReplaces Part Numbers: 14H862, AD2850R, D2789R, R20228(3) Clutch Pressure Plate Spring (Belleville) Washer0.572″ inside diameter0.937″ outside diameter0.035″ thickSpring steelTorque initially to 15 FT pounds, then adjust as neededUse to smooth out the hand clutch engagement3 used per tractorReplaces part Numbers: JDS1626

Reference Numbers:

AA6129R